(click on the pictures to view!)
This is the corner in my workshop reserved for the grinding machine.
Currently the machine is almost complete. I only need to change the motor&gearbox to another with slower rpmīs.
I need to have the rpmīs at the table down to about one turn in four seconds. Currently it is about 70 rpm.
I have machine drawings available. If You want them, please e-mail me.
Details 1
Details 2
Details 3
Details 4
Copyright © 1995-2007, 2008
Juhani Kyyrö
All rights reserved
This page was last updated:
